Materials

6 min read

Why oak gets better with age

How European oak deepens in colour over the years, and the finish that lets it age well.

Written by Oliver Grant

Smoked oak fin wall with a ceramic vase on a travertine ledge

Oak is the timber we specify more than any other. It is strong, it is easy to repair, and unlike most modern finishes it becomes more beautiful as it is used. A well made oak floor or table will look better in its twentieth year than in its first, provided it is chosen and finished with that long life in mind.

How oak changes colour

Freshly cut oak is pale and slightly pink. Over the first year, exposure to light and air oxidises the tannins in the wood and it settles into a warmer honey tone. Where sun falls directly on it, the change is faster and deeper. This is why we never lay rugs on a new oak floor in the first months: the covered area stays pale and leaves a visible outline.

European oak has a tighter grain and a calmer, more golden colour than American white oak, which tends towards a cooler grey. For floors and furniture that will age in warm southern light, we usually choose European oak from slow grown forests, where the growth rings are close and the timber is stable.

Choosing the cut

The way a log is sawn changes the character of every board. Crown cut oak shows the familiar arching cathedral grain and suits relaxed, warm interiors. Quarter sawn oak shows straight lines and silvery flecks called medullary rays, and it is more stable, which makes it our choice for joinery doors and long table tops. Rustic grades keep knots and colour variation; prime grades are calm and even.

For floors, wide boards of 180 to 240 millimetres feel generous in larger rooms. In small apartments, a herringbone or chevron pattern in narrower boards adds movement without making the room look busy.

Oil, not lacquer

Lacquer sits on top of the wood like a plastic film. It looks perfect at first, but once it is scratched the damage shows as a white line, and the whole floor has to be sanded to repair it. Hardwax oil soaks into the timber instead. It gives a soft, natural sheen, and a scratch or worn patch can be spot repaired with a cloth and a little more oil.

We usually finish oak with a natural or slightly white tinted hardwax oil, depending on how warm the room should feel. A white tint holds back the yellowing for a few years; a natural oil lets the honey colour come through sooner.

Caring for it over the years

Sweep or vacuum regularly, because grit is what wears a floor. Clean with a damp, never wet, mop and a soap made for oiled floors, which feeds the finish as it cleans. Wipe up water quickly, use felt pads under chair legs and keep a mat inside every outside door.

Every one to two years, depending on traffic, apply a maintenance oil to the busiest areas. It takes an afternoon and brings the surface back to life. Treated like this, an oak floor will easily outlast the house around it, and every year it will carry a little more of the people who live there.

Have a room in mind?

Have a room in mind?

Studio notes

One quiet letter a month on light, materials and rooms worth seeing.

Intora

Copyright 2026 Intora. All rights reserved.

Back to top

Create a free website with Framer, the website builder loved by startups, designers and agencies.